Everything you need to know about mould and mould removal.
Michael Schorling
- 12 min read
- Home
- Products
- Ventilation
- UB 20xx – ex-proof ventilator
UB 20xx – ex-proof ventilator
Axial ventilator explosion-proof
In potentially explosive environments, the fan extracts hazardous gases safely and quickly. For ventilation in logistics warehouses and for remediation work in contaminated areas. For repair and maintenance work at petrol stations and tank installations, in manholes and tanks. For use in the chemical industry and for fire brigade operations.
The housing made of a robust plastic material dissipates stresses into the ground and thus prevents static charging and dangerous sparking. The housing and motor seals comply with the high protection class IP 55 and provide effective protection against dust and water. Antistatic hoses ensure safe operation.
ATEX: motor/housing: II 2 G Ex db eb IIB T6 Gb, II 2 G Ex IIB T6 Gb, Zone 1+2
Interested?
Key features
-
ATEX explosion-proof ventilator
-
For harsh working conditions
-
PC/ABS antistatic casing, weatherproof, flame retardant and chemical resistant
-
High air flow
-
Easy transport with comfortable handle
-
Possibility to connect a flex tube
-
Effective protection against dust and water
-
Safely blow or exhaust hazardous gases with minimal risk of the fan causing a spark
-
Atex certification: II 2 G Ex db eb IIB T6 Gb, II 2 G Ex IIB T6 Gb, Zone 1+2
Special features in potentially explosive atmospheres
Installation conditions and the different hazardous areas must be observed; only connect the unit to explosion-protected mains sockets; ground antistatic hoses if necessary.
Fans for explosive atmospheres
Fans with ATEX approval may be operated in Zone 1 and 2.
Zone 1 is an area in which a hazardous explosive atmosphere consisting of a mixture of air and flammable gases, vapours or mists is likely to occur in normal operation occasionally. The equipment is approved for substance group IIB. A typical gas for group IIB is ethylene with an ignition energy of 60 - 180 mJ.
Ventilation of shafts
If the existing natural ventilation in shafts and duct systems is not sufficient due to local conditions such as the location of the shafts or their cover properties, additional, technical ventilation measures become necessary. Especially in warm temperatures, when the air in the manhole is cooler than that in the surrounding area, it is often not possible to provide sufficient ventilation. Even temporarily opening manhole covers is not always sufficient for optimal ventilation.
In sewer shafts, for example, foul gases can displace the oxygen in the air and thus lead to unconsciousness among sewer workers. This can be remedied with targeted technical ventilation and powerful fans. The fresh air then reaches the workplace directly and prevents health impairments caused by bad air.
Sufficient technical ventilation is achieved when, for example, an air flow of at least 600m³/h per m² of duct cross-section is achieved in ducts.
Product specifications
Air flow
1,392
m³/h
Air pressure
195
Pa
Fan
Axial
type
Fan speed
1
Power consumption
250
W
Power supply
230/1ph/50
V/Hz
Sound level
74
dB(A)
Flex rube diametre
205
Ømm
Protection class
IP55
Product size (l x w x h)
330 x 305 x 355
mm
Box size (l x w x h)
450 x 400 x 530
mm
Net/gross weight
8.2/15
kg
Pallet
8
pcs
Accessories and consumables
Product code: 1250211
Accessory for UB 20xx
Product code: 1250099
Accessory for UB 20xx
Product code: 1450290
Accessory for UB 20xx, EFi 75xx
Useful downloads
Related products
Axial ventilator explosion-proof
Explosion-proof ventilator with an air flow rate of 4250m³/h. Safe and quick extraction of dangerous gases. Low energy consumption.
Radial fans for explosion protection zones
Ideal for long air transport routes in ex-proof zones with high counter-pressure.
Axial ventilator for ventilation and drying
Versatile, powerful ventilators for drying and ventilating construction sites, tunnels and rooms.
Featured insights
The importance of drying out new buildings during the construction phase.
Michael Schorling
- 2 min read
Discover everything you need to know about approaching a water damage restoration project.
Alan James
- 11 min read
Enquire about this product
Complete your details below and the right person from our expert team will get back to you.
For service and spare parts enquiries please include serial number and product type in the Message field.