Swimming pool dehumidifier solutions for rental homes
Niels Nautrup
- 1 min read
- Home
- Products
- Dehumidifiers
- Dantherm CDP 40-50-70 – swimming pool dehumidifiers
Dantherm CDP 40-50-70 – swimming pool dehumidifiers
Wall-mounted/floor-standing swimming pool dehumidifiers
The wall-mounted or floor-standing CDP 40-50-70 condensation dehumidifiers have been designed to blend well with any modern pool interior. Offering energy-efficient and near-silent humidity control, the units were conceived with a view to quality and ease of operation. Combined with highly efficient fans and compressors, the advanced remote control and monitoring options contribute to cost-efficient operation and significant energy savings.
The range is also available in through-the-wall versions.
Interested?
Key features
-
Low sound level
-
Low energy consumption
-
Evaporator and condenser coils are epoxy coated
-
Metal parts are powder coated before assembly
-
Optional remote control
-
Integrated control of heating and humidity (ON/OFF)
-
BMS Communication (Modbus RS485)
-
230V connection
Dantherm CDP 40-50-70 dehumidifiers for humidity control in indoor swimming pools are developed with a focus to quality, functionality and energy saving. Highly efficient fans and compressors, combined with a new advanced remote control and control options, contribute to cost-efficient operation and significant energy savings.
The CDP is an energy efficient and quiet pool dehumidifier. It works in accordance with the condensation principle. A fan draws the humid air into the dehumidifier and through an evaporator coil. When passing through the evaporator the air is cooled down to below its dew point temperature, and its content of water vapour is condensed into water, which falls into the drip tray and then is led from the drip tray to a drain. The cold, dry air is then passed over the condenser coil where it is re-heated, before leaving the unit at a temperature, which is approx. 5°C higher than at the inlet. Built in electronic hygrostat and thermostat. Active, demand controlled defrosting.
Product specifications
Operating temperature range
10-36
°C
Operating humidity range
40-100
% RH
Dehumidification @ 30°C/60% RH
35.0
l/24h
Specific Energy Consumption @ 30°C/60% RH
0.47
kWh/l
Air flow
400
m³/h
Sound pressure level
46
dB(A)
R407c gas weight/CO2 equivalent
0.7/1.24
kg/t
Power supply
230/1ph/50
V/Hz
Power consumption @ 30°C/60% RH
0.69
kW
Power consumption with electric heater @ 30°C/60% RH
2.69
kW
Heat recovered @ 30°C/60% RH
1.97
kW
Product size (w x d x h)
1010 x 326 x 770
mm
Weight
56.5
kg
Suitable for
Accessories and consumables
Product code: 093455
Accessory for CDP 40-50-70, CDP 40-50-70T, CDF 40-50-70
Product code: 094322
Accessory for CDP 40-50-70
Product code: 094333
Accessory for CDP 40, CDP 40T, CDF 40
Product code: 094334
Accessory for CDP 50, CDP 50T, CDF 50
Product code: 094335
Accessory for CDP 70, CDP 70T, CDF 70
Product code: 094340
Accessory for CDP 40-50-70, CDP 40-50-70T, CDF 40-50-70
Product code: 094336
Accessory for CDP 40, CDP 40T, CDF 40
Product code: 094337
Accessory for CDP 50, CDP 50T, CDF 50
Product code: 094338
Accessory for CDP 70, CDP 70T, CDF 70
Product code: 094339
Accessory for CDP 40-50-70, CDP 40-50-70T, CDF 40-50-70
Product code: 051710
Accessory for CDP 40-50-70, CDP 40-50-70T, CDF 40-50-70
Useful downloads
Related products
Wall-mounted swimming pool dehumidifiers
The CDP 40T-50T-70T condensation dehumidifiers have been designed for through-the-wall mounting in your swimming pool plant room.
High capacity ducted swimming pool and commercial dehumidifiers
The CDP 75-125-165 condensation dehumidifiers have been designed for ducted installation in plant rooms for a wide range of commercial installation.
High capacity swimming pool and commercial ducted dehumidifiers
The DanX AF is a very effective heat pump dehumidification system, which perfectly controls the humidity and indoor temperature while offering significant running cost reductions.
Featured insights
Optimise the environment and help your swimming pool stay pristine
Stig Solberg
- 3 min read
How to get humidity levels right
Niels Nautrup
- 5 min read
Enquire about this product
Complete your details below and the right person from our expert team will get back to you.
For service and spare parts enquiries please include serial number and product type in the Message field.