Dantherm CDP 40-50-70 – swimming pool dehumidifiers
The wall-mounted or floor-standing CDP 40-50-70 condensation dehumidifiers have been designed to blend well with any modern pool interior. Offering energy-efficient and near-silent humidity control, the units were conceived with a view to quality and ease of operation. Combined with highly efficient fans and compressors, the advanced remote control and monitoring options contribute to cost-efficient operation and significant energy savings.
The range is also available in through-the-wall versions.
View other swimming pool dehumidifiers or see our full range of commercial and industrial dehumidifiers suitable for multiple applications.
![]()
Dantherm CDP 40-50-70 – swimming pool dehumidifiers
| ![]()
Dantherm CDP swimming pool dehumidifiers
|
![]()
Dantherm CDP 50 – swimming pool dehumidifiers
| ![]()
Dantherm CDP 70 – swimming pool dehumidifiers
|
![]()
Installation of Dantherm electric heating coil for CDP dehumidifiers
| ![]()
Installation of Dantherm LPHW heating coil for CDP dehumidifiers
|
![]()
Dantherm CDP installation diagram
| ![]()
Dantherm CDP 50 spa installation
|
Key features
- Low sound level
- Low energy consumption
- Evaporator and condenser coils are epoxy coated
- Metal parts are powder coated before assembly
- Optional remote control
- Integrated control of heating and humidity (ON/OFF)
- BMS Communication (Modbus RS485)
- 230V connection
Dantherm CDP 40-50-70 dehumidifiers for humidity control in indoor swimming pools are developed with a focus to quality, functionality and energy saving. Highly efficient fans and compressors, combined with a new advanced remote control and control options, contribute to cost-efficient operation and significant energy savings.
The CDP is an energy efficient and quiet pool dehumidifier. It works in accordance with the condensation principle. A fan draws the humid air into the dehumidifier and through an evaporator coil. When passing through the evaporator the air is cooled down to below its dew point temperature, and its content of water vapour is condensed into water, which falls into the drip tray and then is led from the drip tray to a drain. The cold, dry air is then passed over the condenser coil where it is re-heated, before leaving the unit at a temperature, which is approx. 5°C higher than at the inlet. Built in electronic hygrostat and thermostat. Active, demand controlled defrosting.
Product specifications
Specifications | Units | CDP 40 |
---|---|---|
Operating temperature range | °C | 10-36 |
Operating humidity range | % RH | 40-100 |
Dehumidification @ 30°C/60% RH | l/24h | 35.0 |
Specific Energy Consumption @ 30°C/60% RH | kWh/l | 0.47 |
Air flow | m³/h | 400 |
Sound pressure level | dB(A) | 46 |
R407c gas weight/CO2 equivalent | kg/t | 0.7/1.24 |
Power supply | V/Hz | 230/1ph/50 |
Power consumption @ 30°C/60% RH | kW | 0.69 |
Power consumption with electric heater @ 30°C/60% RH | kW | 2.69 |
Heat recovered @ 30°C/60% RH | kW | 1.97 |
Product size (w x d x h) | mm | 1010 x 326 x 770 |
Weight | kg | 56.5 |
Specifications | Units | CDP 50 |
---|---|---|
Operating temperature range | °C | 10-36 |
Operating humidity range | % RH | 40-100 |
Dehumidification @ 30°C/60% RH | l/24h | 56.5 |
Specific Energy Consumption @ 30°C/60% RH | kWh/l | 0.48 |
Air flow | m³/h | 680 |
Sound pressure level | dB(A) | 47 |
R407c gas weight/CO2 equivalent | kg/t | 0.9/1.60 |
Power supply | V/Hz | 230/1ph/50 |
Power consumption @ 30°C/60% RH | kW | 1.04 |
Power consumption with electric heater @ 30°C/60% RH | kW | 4.54 |
Heat recovered @ 30°C/60% RH | kW | 2.95 |
Product size (w x d x h) | mm | 1160 x 326 x 770 |
Weight | kg | 65.0 |
Specifications | Units | CDP 70 |
---|---|---|
Operating temperature range | °C | 10-36 |
Operating humidity range | % RH | 40-100 |
Dehumidification @ 30°C/60% RH | l/24h | 81.2 |
Specific Energy Consumption @ 30°C/60% RH | kWh/l | 0.43 |
Air flow | m³/h | 900 |
Sound pressure level | dB(A) | 50 |
R407c gas weight/CO2 equivalent | kg/t | 1.2/2.13 |
Power supply | V/Hz | 230/1ph/50 |
Power consumption @ 30°C/60% RH | kW | 1.24 |
Power consumption with electric heater @ 30°C/60% RH | kW | 6.24 |
Heat recovered @ 30°C/60% RH | kW | 4.15 |
Product size (w x d x h) | mm | 1495 x 326 x 770 |
Weight | kg | 75.5 |
Suitable for:
- Leisure and recreation
- Swimming pools